With the Tool Dynamic TD Preset Automatic Drive, you combine two key tool preparation steps into a single process: balancing and fully automatic tool presetting (3 axes). This reduces setup times, simplifies workflows, and supports consistent, repeatable quality in tool preparation – especially for frequently changing tools and demanding machining processes.
Balancing machine Tool Dynamic TD Preset Automatic Drive
For fully automatic balancing and presetting in one step
订货号:
TD114-H13-A11-C13-EU
Balancing machine Tool Dynamic TD Preset Automatic Drive
For fully automatic balancing and presetting in one step
Benefits
- Combination of the Tool Dynamic Comfort Plus and the Microset UNO Automatic Drive in one system
- Increased efficiency by combining two process steps
- Maximum precision thanks to highly accurate tool clamping using HAIMER balancing adapters
- Compact system integration minimizes floor space requirements
- Intuitive operation via HAIMER TDC 4.0 and Microvision UNO with a 27" multi-touch screen
- Adapter for all interfaces
- High operating convenience through automated workflows
- Motorized axes (X, Z, C) for fully automatic tool presetting
Typical applications
- Tool preparation for CNC manufacturing with the highest quality requirements
- Standardization of setup processes in tool management and toolrooms
- Reduced throughput times for frequent tool changes
- Increased process reliability for tools requiring superior runout accuracy and precise measurement
- Efficient workflows in high-volume and high-mix production
交付范围
- Automatic hood
- Optional automatic Balluff unit in camera carrier
- Optional gripper unit for automatic cutting edge measurement
- Optional optical carrier with RFID read/write unit for automatic reading and writing of RFID chips on the tool holder
翰默-小贴士
The TD Preset Automatic Drive is designed for users who want to combine balancing and tool presetting in one seamless process chain. Selecting the appropriate interfaces or adapters and integrating the system into your tool management workflow are key factors for the optimal configuration.
Balancing machine Tool Dynamic TD Preset Automatic Drive
| 说明 | 规范: | 价值: 公制/ 寸 |
|---|---|---|
| 质量(重量) | M | 804 kg |
| 主轴转速 | 300 - 1100 U/Min | |
| 测量精度 | < 0,5 gmm | |
| 电源接头 | 230 / 50 - 60 V / Hz | |
| 电源 | 1,5 kW | |
| 气源 | 5 - 6 bar | |
| 重复测量精度 | ± 0,002 mm | |
| 最长刀具长度 | 700 mm | |
| 可以测量和预调的最大刀具长度 | 400 mm | |
| 最大可测的刀具直径 | Ø | 400 mm |
| 最大刀具重量 | G | 30 kg |
| 分辨率 | 0,001 mm | |
| 宽度 | B | 1900 mm |
| 高度 | H | 2580 mm |
| Deep | T | 800 mm |
设备
高精度的测量必须建立在稳重的底座基础上
集成操作界面便于操作
显示精确的主轴角度
用激光标示不平衡位置和改进位置
可与标签打印机连接,在标签上打印结果
通过径向钻孔调 整平衡
用平衡环或者其它移动方式调平衡
测试过程中的误差补偿(2次测量,旋转180°精确测量)
快速精确地测量重复部分(1次测量运行)
在单平面测量和补偿不平衡量(静态)
订货号 80.252.01
在双平面测量和补偿不平衡量(动态)
订货号 80.202.00
在预定位置调节平衡,比如:使用动平衡螺钉
订货号 80.217.00
主轴能自动旋转到选定角度位置
订货号 80.277.00
储存架带两个集成的抽屉可以储存转换套或者其它附件
订货号 80.212.00
用铣削方式来调节不平衡量
订货号 80.245.06
人性化的图形界面新软件可通过触摸屏控制
主机操作界面的语言
通过 LAN 网络或者优盘将数据传输到数
控机床的控制器中,可以选配通过巴鲁
夫芯片传输数据的系统和 DAC 链接
或者使用鼠标和键盘轻松地操作软件
Windows 10
带触摸屏的 TFT 显示器 (可用于
经济型和经济增 强型动平衡机的 升级)
设备选项
可选标签打印机托盘(需要工业
4.0级控制终端)
刀具秤及刀具的 选配支撑台(需
要配置工业4.0级 控制终端)
订货号 80.209.00
针对特殊钢材或者其它材料,可使用此功能
订货号 80.213.01
通过轴向钻孔达到平衡
订货号 80.218.00
测量时不需要固定调整 180角度(例如 PSC 刀柄)
订货号 80.214.00
打印完整测试报告(动平衡证书)
订货号 80.245.12
不同用户不同权限
订货号 80.245.09
预先设定的不可进行平衡调节的区域
订货号 80.245.10
当补偿位置不可以操作时,计算替换位置
订货号 80.245.11
更短的测量时间,保证有效测量精度
在外表面去除偏 心量改善平衡
订货号 80.232.02
针对加长刀柄的保护罩,最长高度700mm 高大直径425mm(可选择在顶端的第二激光源)
订货号 80.203.00
适用于带 M6 螺纹孔刀柄的精细动平衡调整的 11X10 特殊螺钉组
适用于有圆柱外 径的刀具系统的
精细动平衡
精密地测量重量
订货号 80.207.12
从电子秤自动传输转子重量
测试刀具重量,可 选择电子秤集成
软件直接传输重 量到平衡软件
打印详细动平衡 报告的激光打印
机
用于测试和培训目的
技术培训是在质 保期内获得保修 的必要条件
快速精确地测量重复部分(1次测量运行)
订货号 80.245.13
输出测量结果软件
Order No. 80.215.05 Label Printer Dymo 550 (on option) Printout of a label with measuring results (short report). USB interface
说明
Balancing machine Tool Dynamic TD Preset Automatic Drive
For fully automatic balancing and presetting in one step
With the Tool Dynamic TD Preset Automatic Drive, you combine two key tool preparation steps into a single process: balancing and fully automatic tool presetting (3 axes). This reduces setup times, simplifies workflows, and supports consistent, repeatable quality in tool preparation – especially for frequently changing tools and demanding machining processes.
Benefits
- Combination of the Tool Dynamic Comfort Plus and the Microset UNO Automatic Drive in one system
- Increased efficiency by combining two process steps
- Maximum precision thanks to highly accurate tool clamping using HAIMER balancing adapters
- Compact system integration minimizes floor space requirements
- Intuitive operation via HAIMER TDC 4.0 and Microvision UNO with a 27" multi-touch screen
- Adapter for all interfaces
- High operating convenience through automated workflows
- Motorized axes (X, Z, C) for fully automatic tool presetting
Typical applications
- Tool preparation for CNC manufacturing with the highest quality requirements
- Standardization of setup processes in tool management and toolrooms
- Reduced throughput times for frequent tool changes
- Increased process reliability for tools requiring superior runout accuracy and precise measurement
- Efficient workflows in high-volume and high-mix production
交付范围
- Automatic hood
- Optional automatic Balluff unit in camera carrier
- Optional gripper unit for automatic cutting edge measurement
- Optional optical carrier with RFID read/write unit for automatic reading and writing of RFID chips on the tool holder
翰默-小贴士
The TD Preset Automatic Drive is designed for users who want to combine balancing and tool presetting in one seamless process chain. Selecting the appropriate interfaces or adapters and integrating the system into your tool management workflow are key factors for the optimal configuration.
技术规格
Balancing machine Tool Dynamic TD Preset Automatic Drive
| 说明 | 规范: | 价值: 公制/ 寸 |
|---|---|---|
| 质量(重量) | M | 804 kg |
| 主轴转速 | 300 - 1100 U/Min | |
| 测量精度 | < 0,5 gmm | |
| 电源接头 | 230 / 50 - 60 V / Hz | |
| 电源 | 1,5 kW | |
| 气源 | 5 - 6 bar | |
| 重复测量精度 | ± 0,002 mm | |
| 最长刀具长度 | 700 mm | |
| 可以测量和预调的最大刀具长度 | 400 mm | |
| 最大可测的刀具直径 | Ø | 400 mm |
| 最大刀具重量 | G | 30 kg |
| 分辨率 | 0,001 mm | |
| 宽度 | B | 1900 mm |
| 高度 | H | 2580 mm |
| Deep | T | 800 mm |
设备
设备
高精度的测量必须建立在稳重的底座基础上
集成操作界面便于操作
显示精确的主轴角度
用激光标示不平衡位置和改进位置
可与标签打印机连接,在标签上打印结果
通过径向钻孔调 整平衡
用平衡环或者其它移动方式调平衡
测试过程中的误差补偿(2次测量,旋转180°精确测量)
快速精确地测量重复部分(1次测量运行)
在单平面测量和补偿不平衡量(静态)
订货号 80.252.01
在双平面测量和补偿不平衡量(动态)
订货号 80.202.00
在预定位置调节平衡,比如:使用动平衡螺钉
订货号 80.217.00
主轴能自动旋转到选定角度位置
订货号 80.277.00
储存架带两个集成的抽屉可以储存转换套或者其它附件
订货号 80.212.00
用铣削方式来调节不平衡量
订货号 80.245.06
人性化的图形界面新软件可通过触摸屏控制
主机操作界面的语言
通过 LAN 网络或者优盘将数据传输到数
控机床的控制器中,可以选配通过巴鲁
夫芯片传输数据的系统和 DAC 链接
或者使用鼠标和键盘轻松地操作软件
Windows 10
带触摸屏的 TFT 显示器 (可用于
经济型和经济增 强型动平衡机的 升级)
设备选项
可选标签打印机托盘(需要工业
4.0级控制终端)
刀具秤及刀具的 选配支撑台(需
要配置工业4.0级 控制终端)
订货号 80.209.00
针对特殊钢材或者其它材料,可使用此功能
订货号 80.213.01
通过轴向钻孔达到平衡
订货号 80.218.00
测量时不需要固定调整 180角度(例如 PSC 刀柄)
订货号 80.214.00
打印完整测试报告(动平衡证书)
订货号 80.245.12
不同用户不同权限
订货号 80.245.09
预先设定的不可进行平衡调节的区域
订货号 80.245.10
当补偿位置不可以操作时,计算替换位置
订货号 80.245.11
更短的测量时间,保证有效测量精度
在外表面去除偏 心量改善平衡
订货号 80.232.02
针对加长刀柄的保护罩,最长高度700mm 高大直径425mm(可选择在顶端的第二激光源)
订货号 80.203.00
适用于带 M6 螺纹孔刀柄的精细动平衡调整的 11X10 特殊螺钉组
适用于有圆柱外 径的刀具系统的
精细动平衡
精密地测量重量
订货号 80.207.12
从电子秤自动传输转子重量
测试刀具重量,可 选择电子秤集成
软件直接传输重 量到平衡软件
打印详细动平衡 报告的激光打印
机
用于测试和培训目的
技术培训是在质 保期内获得保修 的必要条件
快速精确地测量重复部分(1次测量运行)
订货号 80.245.13
输出测量结果软件
Order No. 80.215.05 Label Printer Dymo 550 (on option) Printout of a label with measuring results (short report). USB interface
配件