Two approved systems – a trendsetting innovation.
The Tool Dynamic Preset Microset is a perfect combination of HAIMER´s balancing and HAIMER´s Microset presetting technology. The tool is clamped in the high precsion balancing spindle fitted with HAIMER´s proven adapter system. This saves time and increases accuracy because the tool does not have to be re-clamped.
Tool Balancing and Tool Presetting Tool Dynamic TD Preset Microset
- Breakthrough state-of-the-art Technology: Tool Dynamic Comfort Plus and Microset UNO Premium
- Highest efficiency and time saving by combining two production stages
- Utmost precision due to high precision clamping in HAIMER’s balancing Adapters
- Needs little space
- Simple and logical Operation with HAIMER TDC 4.0 and Microvision UNO with 27" touchscreen
- Adapter for all interfaces
- Highest possible measuring comfort
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Mass (weight) | M | 760 kg |
| Spindle speed | 300 - 1100 U/Min | |
| Measuring accuracy | < 0,5 gmm | |
| Power connection | 230 / 50 - 60 V / Hz | |
| Power | 1,5 kW | |
| Compressed air | 5 - 6 bar | |
| Repeatability | ± 0,002 mm | |
| Maximum tool length | 700 mm | |
| max. tool length measuring and presetting | 400 mm | |
| Maximum tool diameter | Ø | 400 mm |
| Maximum tool weight | G | 30 kg |
| Smallest unit of measure | 0,001 mm | |
| Width | B | 2000 mm |
| Height | H | 1800 mm |
| Deep | T | 850 mm |
Two approved systems – a trendsetting innovation.
The Tool Dynamic Preset Microset is a perfect combination of HAIMER´s balancing and HAIMER´s Microset presetting technology. The tool is clamped in the high precsion balancing spindle fitted with HAIMER´s proven adapter system. This saves time and increases accuracy because the tool does not have to be re-clamped.
- Breakthrough state-of-the-art Technology: Tool Dynamic Comfort Plus and Microset UNO Premium
- Highest efficiency and time saving by combining two production stages
- Utmost precision due to high precision clamping in HAIMER’s balancing Adapters
- Needs little space
- Simple and logical Operation with HAIMER TDC 4.0 and Microvision UNO with 27" touchscreen
- Adapter for all interfaces
- Highest possible measuring comfort
| Description | Norm: | Value: metric/ inch |
|---|---|---|
| Mass (weight) | M | 760 kg |
| Spindle speed | 300 - 1100 U/Min | |
| Measuring accuracy | < 0,5 gmm | |
| Power connection | 230 / 50 - 60 V / Hz | |
| Power | 1,5 kW | |
| Compressed air | 5 - 6 bar | |
| Repeatability | ± 0,002 mm | |
| Maximum tool length | 700 mm | |
| max. tool length measuring and presetting | 400 mm | |
| Maximum tool diameter | Ø | 400 mm |
| Maximum tool weight | G | 30 kg |
| Smallest unit of measure | 0,001 mm | |
| Width | B | 2000 mm |
| Height | H | 1800 mm |
| Deep | T | 850 mm |
- Early wear detection
- Preservation of the target condition
- High availability of HAIMER specialists
- Consistent quality level
- Prerequisite for certification according to ISO 9001